Heat Pump Cost Calculator — Burlington, ON
Get a realistic estimate of what a new heat pump costs installed in Burlington — equipment, labour, permits, and available Ontario rebates, all in.
📍 Burlington Pricing
⚡ 2-Minute Estimate
💰 Rebates Included
By submitting this form, you are giving your consent to receive phone calls and text messages from our contractor partners.
Get Accurate Quotes from Local Pros
These are estimates. Get precise quotes from certified HVAC contractors in your area — for free.
Get Free QuotesWhat Does a Heat Pump Cost to Install in Burlington?
| System Type | Installed Cost (Before Rebates) | Typical Burlington Use |
|---|---|---|
| Air-Source Heat Pump (Single Zone) | $4,500 – $8,500 | Condo, smaller home, add-on zone |
| Cold-Climate Heat Pump (2–3 tonne) | $5,500 – $10,000 | 1,400–2,500 sq ft detached |
| Ducted Heat Pump (3–4 tonne) | $7,500 – $13,500 | 2,500–4,000 sq ft home |
| Multi-Zone Ductless (2–4 heads) | $8,000 – $18,000 | Whole home without ductwork |
| Ground-Source (Geothermal) | $20,000 – $40,000+ | New builds or deep retrofit |
What Goes Into a Heat Pump Installation Quote
💡 Ontario Rebates That Lower Your Cost
Common Questions About Heat Pump Cost in Burlington
Our Heat Pump Cost Calculator provides an estimated installation cost based on the information you enter, such as your home size, system type, and location. While the estimate is helpful for planning your budget, the final price may vary after an on-site assessment by an HVAC professional.
Several factors influence the total installation cost, including the size of your home, the type and efficiency of the heat pump, existing ductwork, electrical upgrades, labor costs, and any additional installation requirements.
Yes. Our Heat Pump Cost Calculator is completely free and requires no payment or commitment. It is designed to help homeowners estimate potential installation costs before requesting a professional quote.
Yes. Along with estimating installation costs, the calculator can help you understand potential long-term energy savings. Actual savings will depend on your home’s insulation, local energy rates, system efficiency, and how you use your heating and cooling system.
Yes. The calculator provides a reliable estimate, but a licensed HVAC technician should inspect your home to determine the exact system size, installation requirements, and final project cost.
For the most accurate estimate, it’s helpful to know your home’s approximate square footage, current heating system, location, insulation level, and whether you need a replacement or a new heat pump installation.
Sizing depends on your home’s square footage, insulation quality, window count, and layout — not just floor area. A 1,500 sq ft Burlington home might need anywhere from a 2-ton to 3-ton system depending on how well-insulated it is. Use our Heat Pump Size Calculator for a quick estimate, then confirm with an in-home load assessment before purchasing.
In most cases, yes. Cold-climate heat pumps typically run 2–3 times more efficiently than a natural gas furnace, since they move heat rather than generate it. Actual monthly savings depend on Burlington’s electricity rates versus Enbridge gas pricing, plus your home’s insulation. Check your projected numbers with our Heat Pump Operating Cost Calculator.
Most Burlington homeowners see monthly operating costs between $60 and $250, depending on home size, insulation, and how cold the winter runs. Homes with newer insulation and a properly sized system tend to land on the lower end. Want a number specific to your home? Try our Heat Pump Savings Calculator.
Get a Real Quote from Burlington’s Own HVAC Team
Want to double-check your system size first? Try directly.
Get a written heat pump installation quote from Burlington’s trusted HVAC team — no pressure, no obligation.